1 [2] 3 4 >>> MLD-5.x / Systems / x86 Systeme (PC) / Lange Bootzeit mit MLD 5.4 testing
 

Offline clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20165
    • View Profile
    • ClausMuus.de
Lange Bootzeit mit MLD 5.4 testing
« Reply #15 on: November 20, 2017, 21:01:25 »
Das Problem mit dem Ton bestand nur kurz. Mit dem nächsten Update ist das wieder behoben.

Beim lirc stellt sich die Frage, warum der ohne lirc2uinput nicht gestartet wurde. Du kannst mal schauen was für ne Ausgabe Du bekommst, wenn Du den von Hand startest:
Code: [Select]
lircd -n --driver=irman --device=/dev/ttyACM0 --output=/var/run/lirc/lircd-ttyACM0 /etc/lircd.conf
Claus
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline MR-Caos

  • Adv. Member
  • ***
  • Posts: 124
    • View Profile
Lange Bootzeit mit MLD 5.4 testing
« Reply #16 on: November 26, 2017, 18:09:33 »
Quote from: clausmuus on November 20, 2017, 21:01:25
Das Problem mit dem Ton bestand nur kurz. Mit dem nächsten Update ist das wieder behoben.

Beim lirc stellt sich die Frage, warum der ohne lirc2uinput nicht gestartet wurde. Du kannst mal schauen was für ne Ausgabe Du bekommst, wenn Du den von Hand startest:
Code: [Select]
lircd -n --driver=irman --device=/dev/ttyACM0 --output=/var/run/lirc/lircd-ttyACM0 /etc/lircd.conf
Claus
Hallo,

lircd von Hand und ohne lirc2uinput
VDR reagiert aber auf keine Eingaben
Code: [Select]
vdrhd> lircd -n --driver=irman --device=/dev/ttyACM0 --output=/var/run/lirc/lircd-ttyACM0 /etc/lircd.conf
lircd-0.10.0[15904]: Info: lircd:  Opening log, level: Info
lircd-0.10.0[15904]: Warning: Running as root
lircd-0.10.0[15904]: Info: Using remote: VDR.
lircd-0.10.0[15904]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_PAUSE
lircd-0.10.0[15904]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_RECORD
lircd-0.10.0[15904]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_FASTFORWARD
lircd-0.10.0[15904]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_REWIND
lircd-0.10.0[15904]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_NEXT
lircd-0.10.0[15904]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_BACK
lircd-0.10.0[15904]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_VOLUMEUP
lircd-0.10.0[15904]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_VOLUMEDOWN
lircd-0.10.0[15904]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_MUTE
lircd-0.10.0[15904]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_MODE
lircd-0.10.0[15904]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_TIME
lircd-0.10.0[15904]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_PVR
lircd-0.10.0[15904]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_SETUP
lircd-0.10.0[15904]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_PROG3
lircd-0.10.0[15904]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_AUDIO
lircd-0.10.0[15904]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_VIDEO
lircd-0.10.0[15904]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_IMAGES
lircd-0.10.0[15904]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_FN
lircd-0.10.0[15904]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_SCREEN
lircd-0.10.0[15904]: Notice: lircd(irman) ready, using /var/run/lirc/lircd-ttyACM0
Logged
MLD 5.4 - CINE S2 V5.4 - INTEL DH67BL - INTEL G630 - ASUS ENGT520 SILENT/DI/1GD3(LP) - IR-WakeupUSB eco v1.2 - LCD TV Sony KDL 40Z5810
MLD 5.4 - RPI2 - Hama MCE Remote

Offline MarMic

  • Administrator
  • Expert Member
  • ********
  • Posts: 4822
    • View Profile
Lange Bootzeit mit MLD 5.4 testing
« Reply #17 on: November 28, 2017, 13:32:14 »
Alle die davon betroffen sind können Mal die unstable testen! Da haben wir den Kernel optimiert.
Bei uns funktioniert es nun ohne Pause

Gruß MarMic
Logged
SZVDR HD: Intel e5300@1,2ghz - Gigabyte GA-EP41-UD3L - 2GB ddr2 800 - Gainward G210 512mb - Silverstone LC16MR - DVBSky S952 - Astra 19,2 - MLD 5.4

WZVDR HD: Intel g1610@1,6ghz - Intel DH61BE - Scythe Big Shuriken 2 - 4GB ddr3 1333 - Asus GT610 1024mb - Chieftec Hi-Fi HM-02 - Tevii s480 - Astra 19,2 - MLD 5.4

Offline MR-Caos

  • Adv. Member
  • ***
  • Posts: 124
    • View Profile
Lange Bootzeit mit MLD 5.4 testing
« Reply #18 on: November 28, 2017, 18:10:47 »
Hallo,

Ohne "lirc2uinput" startet es normal.

Joe
Logged
MLD 5.4 - CINE S2 V5.4 - INTEL DH67BL - INTEL G630 - ASUS ENGT520 SILENT/DI/1GD3(LP) - IR-WakeupUSB eco v1.2 - LCD TV Sony KDL 40Z5810
MLD 5.4 - RPI2 - Hama MCE Remote

Offline MarMic

  • Administrator
  • Expert Member
  • ********
  • Posts: 4822
    • View Profile
Lange Bootzeit mit MLD 5.4 testing
« Reply #19 on: November 28, 2017, 18:25:42 »
Bei unstable nun auch mit 😋

Hoffen wir zumindest
Logged
SZVDR HD: Intel e5300@1,2ghz - Gigabyte GA-EP41-UD3L - 2GB ddr2 800 - Gainward G210 512mb - Silverstone LC16MR - DVBSky S952 - Astra 19,2 - MLD 5.4

WZVDR HD: Intel g1610@1,6ghz - Intel DH61BE - Scythe Big Shuriken 2 - 4GB ddr3 1333 - Asus GT610 1024mb - Chieftec Hi-Fi HM-02 - Tevii s480 - Astra 19,2 - MLD 5.4

Offline MR-Caos

  • Adv. Member
  • ***
  • Posts: 124
    • View Profile
Lange Bootzeit mit MLD 5.4 testing
« Reply #20 on: November 28, 2017, 19:04:25 »
Quote from: MarMic on November 28, 2017, 18:25:42
Bei unstable nun auch mit 😋

Hoffen wir zumindest
Habe um 18:00 von testing auf unstable ein Upgrade gemacht da ging es mit lirc2uinput noch nicht  ::)
Logged
MLD 5.4 - CINE S2 V5.4 - INTEL DH67BL - INTEL G630 - ASUS ENGT520 SILENT/DI/1GD3(LP) - IR-WakeupUSB eco v1.2 - LCD TV Sony KDL 40Z5810
MLD 5.4 - RPI2 - Hama MCE Remote

Offline MR-Caos

  • Adv. Member
  • ***
  • Posts: 124
    • View Profile
Lange Bootzeit mit MLD 5.4 testing
« Reply #21 on: December 02, 2017, 10:41:07 »
Hallo,

Ich hatte wieder kurz Zeit zum Testen.
Wenn ich das "lirc2uinput" Paket nach dem booten installiere funktioniert Fernbedienung sofort aber UDEV hängst genau so wie beim Start.

Logfile vom nach laden von lirc2uinput:
Code: [Select]
Dec  2 10:30:58 (MLD) user.err vdr: [2278] [fritzbox - Tools.cpp:186] SIP provider names not set! Usage of SIP provider names not possible.
Dec  2 10:32:15 (MLD) daemon.debug kernel: [  169.925794] udevd[798]: udevd message (RELOAD) received
Dec  2 10:32:15 (MLD) daemon.debug kernel: [  169.981826] udevd[798]: seq 3439 queued, 'add' 'acpi'
Dec  2 10:32:15 (MLD) daemon.debug kernel: [  169.983942] udevd[798]: seq 3439 forked new worker [8109]
Dec  2 10:32:15 (MLD) daemon.debug kernel: [  169.984020] udevd[798]: seq 3440 queued, 'add' 'acpi'
Dec  2 10:32:15 (MLD) daemon.debug kernel: [  169.984079] udevd[798]: seq 3441 queued, 'add' 'input'
Dec  2 10:32:15 (MLD) daemon.debug kernel: [  169.984352] udevd[798]: seq 3442 queued, 'add' 'input'
Dec  2 10:32:15 (MLD) daemon.debug kernel: [  169.984389] udevd[798]: seq 3443 queued, 'add' 'acpi'
Dec  2 10:32:15 (MLD) daemon.debug kernel: [  169.984415] udevd[798]: seq 3444 queued, 'add' 'acpi'
Dec  2 10:32:15 (MLD) daemon.debug kernel: [  169.984441] udevd[798]: seq 3445 queued, 'add' 'acpi'
Dec  2 10:32:15 (MLD) daemon.debug kernel: [  169.984540] udevd[798]: seq 3446 queued, 'add' 'acpi'
Dec  2 10:32:15 (MLD) local0.info lircd-0.10.0[8177]: Info: lircd:  Opening log, level: Info
Dec  2 10:32:15 (MLD) local0.notice lircd-0.10.0[8177]: Notice: Version: lircd 0.10.0
Dec  2 10:32:15 (MLD) local0.notice lircd-0.10.0[8177]: Notice: System info: Linux vdrhd 4.14.3.199.33 #1 SMP Thu Nov 30 16:13:07 CET 2017 x86_64 GNU/Linux
Dec  2 10:32:16 (MLD) local0.info lircd-0.10.0[8177]: Info: Initial device: /dev/ttyACM0
Dec  2 10:32:16 (MLD) local0.info lircd-0.10.0[8177]: Info: Initial device: /dev/ttyACM0
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: Options: driver: irman
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: Options: output: /var/run/lirc/lircd-ttyACM0
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: Options: nodaemon: 0
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: Options: plugindir: /usr/lib/x86_64-linux-gnu/lirc/plugins
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: Options: logfile: syslog
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: Options: immediate-init: 0
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: Options: permission: 666
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: Options: driver-options:
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: Options: pidfile: /var/run/lirc/lircd-ttyACM0.pid
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: Options: listen: 0
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: Options: connect: (null)
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: Options: userelease: 0
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: Options: effective_user: (null)
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: Options: release_suffix: _EVUP
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: Options: allow_simulate: 0
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: Options: repeat_max: 600
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: Options: configfile: /etc/lircd.conf
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: Options: dynamic_codes: (null)
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: Current driver: irman
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: Driver API version: 3
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: Driver  version: 0.9.3
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: Driver  info: See file:///usr/share/doc/lirc/plugindocs/irman.html
Dec  2 10:32:16 (MLD) local0.info lircd-0.10.0[8177]: Info: lircd:  Opening log, level: Info
Dec  2 10:32:16 (MLD) local0.warn lircd-0.10.0[8177]: Warning: Running as root
Dec  2 10:32:16 (MLD) local0.info lircd-0.10.0[8177]: Info: Using remote: VDR.
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_PAUSE
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_RECORD
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_FASTFORWARD
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_REWIND
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_NEXT
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_BACK
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_VOLUMEUP
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_VOLUMEDOWN
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_MUTE
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_MODE
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_TIME
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_PVR
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_SETUP
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_PROG3
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_AUDIO
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_VIDEO
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_IMAGES
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_FN
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8177]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_SCREEN
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8191]: Notice: lircd(irman) ready, using /var/run/lirc/lircd-ttyACM0
Dec  2 10:32:16 (MLD) local0.notice lircd-0.10.0[8191]: Notice: accepted new client on /var/run/lirc/lircd-ttyACM0
Dec  2 10:32:16 (MLD) user.info kernel: [  170.976325] input: lircd as /devices/virtual/input/input12
Dec  2 10:33:16 (MLD) daemon.warn kernel: [  230.609133] udevd[798]: seq 3633 '/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/tty/ttyACM0' is taking a long time
Dec  2 10:35:16 (MLD) daemon.err kernel: [  350.611176] udevd[798]: seq 3633 '/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/tty/ttyACM0' killed
Dec  2 10:35:16 (MLD) daemon.warn kernel: [  350.611758] udevd[798]: worker [8113] terminated by signal 9 (KILL)
Dec  2 10:35:16 (MLD) daemon.err kernel: [  350.611763] udevd[798]: worker [8113] failed while handling '/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/tty/ttyACM0'
Dec  2 10:35:16 (MLD) daemon.debug kernel: [  350.612061] udevd[8221]: seq 4587 running
Dec  2 10:35:16 (MLD) daemon.debug kernel: [  350.612329] udevd[8221]: seq 4587 processed
Dec  2 10:35:16 (MLD) daemon.debug kernel: [  350.612525] udevd[8221]: seq 4588 running
Dec  2 10:35:16 (MLD) daemon.debug kernel: [  350.612988] udevd[8221]: seq 4588 processed
Dec  2 10:35:16 (MLD) daemon.debug kernel: [  350.613070] udevd[8221]: seq 4589 running
Dec  2 10:35:16 (MLD) daemon.debug kernel: [  350.613099] udevd[8227]: seq 4590 running
Dec  2 10:35:16 (MLD) daemon.debug kernel: [  350.613464] udevd[8221]: seq 4589 processed
Logged
MLD 5.4 - CINE S2 V5.4 - INTEL DH67BL - INTEL G630 - ASUS ENGT520 SILENT/DI/1GD3(LP) - IR-WakeupUSB eco v1.2 - LCD TV Sony KDL 40Z5810
MLD 5.4 - RPI2 - Hama MCE Remote

Offline clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20165
    • View Profile
    • ClausMuus.de
Lange Bootzeit mit MLD 5.4 testing
« Reply #22 on: December 02, 2017, 11:53:23 »
Hi,

teste mal Bitte mit dem neuen mld-remote Paket und ohne lircd2uinput

Claus
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline MR-Caos

  • Adv. Member
  • ***
  • Posts: 124
    • View Profile
Lange Bootzeit mit MLD 5.4 testing
« Reply #23 on: December 02, 2017, 13:19:54 »
Quote from: clausmuus on December 02, 2017, 11:53:23
Hi,

teste mal Bitte mit dem neuen mld-remote Paket und ohne lircd2uinput

Claus

Hallo,

Jetzt wird sie von lirc erkannt habe aber im VDR keine Funktion. Auch bei irw kommt nichts an.

Code: [Select]
Dec  2 13:07:14 (MLD) local0.info lircd-0.10.0[930]: Info: lircd:  Opening log, level: Info
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: Version: lircd 0.10.0
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: System info: Linux vdrhd 4.14.3.199.33 #1 SMP Thu Nov 30 16:13:07 CET 2017 x86_64 GNU/Linux
Dec  2 13:07:14 (MLD) local0.info lircd-0.10.0[930]: Info: Initial device: /dev/ttyACM0
Dec  2 13:07:14 (MLD) local0.info lircd-0.10.0[930]: Info: Initial device: /dev/ttyACM0
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: Options: driver: irman
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: Options: output: /var/run/lirc/lircd-ttyACM0
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: Options: nodaemon: 0
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: Options: plugindir: /usr/lib/x86_64-linux-gnu/lirc/plugins
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: Options: logfile: syslog
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: Options: immediate-init: 0
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: Options: permission: 666
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: Options: driver-options:
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: Options: pidfile: /var/run/lirc/lircd-ttyACM0.pid
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: Options: listen: 0
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: Options: connect: (null)
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: Options: userelease: 0
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: Options: effective_user: (null)
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: Options: release_suffix: _EVUP
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: Options: allow_simulate: 0
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: Options: repeat_max: 600
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: Options: configfile: /etc/lircd.conf
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: Options: dynamic_codes: (null)
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: Current driver: irman
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: Driver API version: 3
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: Driver  version: 0.9.3
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: Driver  info: See file:///usr/share/doc/lirc/plugindocs/irman.html
Dec  2 13:07:14 (MLD) local0.info lircd-0.10.0[930]: Info: lircd:  Opening log, level: Info
Dec  2 13:07:14 (MLD) local0.warn lircd-0.10.0[930]: Warning: Running as root
Dec  2 13:07:14 (MLD) local0.info lircd-0.10.0[930]: Info: Using remote: VDR.
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_PAUSE
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_RECORD
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_FASTFORWARD
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_REWIND
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_NEXT
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_BACK
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_VOLUMEUP
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_VOLUMEDOWN
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_MUTE
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_MODE
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_TIME
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_PVR
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_SETUP
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_PROG3
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_AUDIO
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_VIDEO
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_IMAGES
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_FN
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[930]: Notice: /etc/lircd.conf: VDR: Multiple values for same code: KEY_SCREEN
Dec  2 13:07:14 (MLD) local0.notice lircd-0.10.0[934]: Notice: lircd(irman) ready, using /var/run/lirc/lircd-ttyACM0
Logged
MLD 5.4 - CINE S2 V5.4 - INTEL DH67BL - INTEL G630 - ASUS ENGT520 SILENT/DI/1GD3(LP) - IR-WakeupUSB eco v1.2 - LCD TV Sony KDL 40Z5810
MLD 5.4 - RPI2 - Hama MCE Remote

Offline clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20165
    • View Profile
    • ClausMuus.de
Lange Bootzeit mit MLD 5.4 testing
« Reply #24 on: December 02, 2017, 14:10:12 »
jetzt kannst Du noch mit "irw /var/run/lirc/lircd-ttyACM0" testen. Das ist direkt die Ausgabe vom lircd
Bei mir funktioniert der atric usb eco allerdings auch noch nicht, und ich weiß noch nicht wo's harkt.
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline MR-Caos

  • Adv. Member
  • ***
  • Posts: 124
    • View Profile
Lange Bootzeit mit MLD 5.4 testing
« Reply #25 on: December 02, 2017, 14:51:25 »
Schön zu lesen das du auch einen Atric Empfänger hast  ;)

Mit lircd2uinput funktioniert er sofort nur udev hat dann Probleme.
Wenn ich wieder zu Hause bin werde ich deinen irw Vorschlag testen.

Joe
Logged
MLD 5.4 - CINE S2 V5.4 - INTEL DH67BL - INTEL G630 - ASUS ENGT520 SILENT/DI/1GD3(LP) - IR-WakeupUSB eco v1.2 - LCD TV Sony KDL 40Z5810
MLD 5.4 - RPI2 - Hama MCE Remote

Offline clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20165
    • View Profile
    • ClausMuus.de
Lange Bootzeit mit MLD 5.4 testing
« Reply #26 on: December 02, 2017, 15:14:39 »
Das oben genannte irw Kommando muss unabhängig vom lic2uonput funktionieren.
Kannst Du bei Deinem Empfänger auch mode2 benutzen um die Funktion zu testen? Bei mir geht das nicht.
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline MR-Caos

  • Adv. Member
  • ***
  • Posts: 124
    • View Profile
Lange Bootzeit mit MLD 5.4 testing
« Reply #27 on: December 02, 2017, 18:24:28 »
Quote from: clausmuus on December 02, 2017, 15:14:39
Das oben genannte irw Kommando muss unabhängig vom lic2uonput funktionieren.
Kannst Du bei Deinem Empfänger auch mode2 benutzen um die Funktion zu testen? Bei mir geht das nicht.

Hallo,

irw funktioniert
Code: [Select]
vdrhd> irw /var/run/lirc/lircd-ttyACM0
ffffd20200000000 00 KEY_MENU VDR
ffffd20200000000 00 KEY_MENU VDR
ffffd30200000000 00 KEY_ESC VDR
ffffd30200000000 00 KEY_ESC VDR
ffffd30200000000 00 KEY_ESC VDR
ffff8f0200000000 00 KEY_INFO VDR
ffff8f0200000000 00 KEY_INFO VDR

mode2 bringt
Code: [Select]
vdrhd> mode2
Using driver default on device auto
Cannot initiate device /dev/lirc/0

Nach änderung von "/etc/lirc/lirc_options.conf" funktioniert auch mode2
Code: [Select]
device = /var/run/lirc/lircd-ttyACM0

joe

« Last Edit: December 02, 2017, 18:28:02 by MR-Caos »
Logged
MLD 5.4 - CINE S2 V5.4 - INTEL DH67BL - INTEL G630 - ASUS ENGT520 SILENT/DI/1GD3(LP) - IR-WakeupUSB eco v1.2 - LCD TV Sony KDL 40Z5810
MLD 5.4 - RPI2 - Hama MCE Remote

Offline clausmuus

  • Administrator
  • Expert Member
  • ********
  • Posts: 20165
    • View Profile
    • ClausMuus.de
Lange Bootzeit mit MLD 5.4 testing
« Reply #28 on: December 02, 2017, 22:34:28 »
Ich hatte mode2 so versucht:
Code: [Select]
mode2 -H irman -d /dev/ttyACM0
bekomme dann aber diesen Fehler:
Code: [Select]
MLD> mode2 -H irman -d /dev/ttyACM0
Using driver irman on device /dev/ttyACM0
Trying device: /dev/ttyACM0
Using device: /dev/ttyACM0
Warning: Running as root.
read() error on /dev/ttyACM0: Resource temporarily unavailable
Eigentlich dürfte mode2 nichts mit dem /var/run/lirc/lircd-ttyACM0 zu tun haben. Außerdem muss lircd gestoppt werden, damit mode2 funktionieren kann.

Claus
Logged
MLD 5.5 - Raspberry PI - 7" Touch TFT - Squeeze Play
MLD 5.5 - lirc yaUsbIR - OctopusNet - XFX GeForce 9300 mit Intel E3200 - 2GB RAM - 12TB HDD - Lian Li PC-C37B - Samsung LE40A559

Offline MR-Caos

  • Adv. Member
  • ***
  • Posts: 124
    • View Profile
Lange Bootzeit mit MLD 5.4 testing
« Reply #29 on: December 03, 2017, 17:42:16 »
Hallo Claus,

VDR + irw horchen auf
Code: [Select]
/var/run/lirc/lircd
Mittels symlink habe ich Funktion auf VDR + IRW  :)
Code: [Select]
ln -s lircd-ttyACM0 lircd
einen reboot überlebt das ganze nicht aber ist schon mal was.

joe
Logged
MLD 5.4 - CINE S2 V5.4 - INTEL DH67BL - INTEL G630 - ASUS ENGT520 SILENT/DI/1GD3(LP) - IR-WakeupUSB eco v1.2 - LCD TV Sony KDL 40Z5810
MLD 5.4 - RPI2 - Hama MCE Remote

1 [2] 3 4 >>> MLD-5.x / Systems / x86 Systeme (PC) / Lange Bootzeit mit MLD 5.4 testing
 



Users Online Users Online

0 Members and 1 Guest are viewing this topic.